forklift brake pad
the forklift brake pad is worn out, and it can not feel out of the normal forklift driving. some can directly view, but some models need to be opened up to see. normal brake pads are 9 mm thick and must be replaced when they are ground to 2-3 mm. when the metal pads attached to the brake pads are completely worn out, the abnormal sound of metal-metal conflict will appear. tino machinery shows that when replacing brake pads, the general repairman replaces all relevant forklift parts together. normally, they can be replaced separately. for example, only the single brake pump leaks oil, the brake pads after replacing the brake pump can clean the brake pads and the brake wheel hub, if the brake pads wear out, the brake wheels can be cleaned. if the hub is not worn out, just change the brake pads, the other parts will be cleaned and cleaned, and the bearing orientation can be added with new butter from scratch. after all installation, the gap between the brake pads and the hub of the brake wheel can be adjusted to normal use.
two. forklift spark plug
forklift spark plug is a small part that many repairmen will advise forklift users to replace earlier, but in fact, if the driver does not feel a little bad fire, slow speed, no artillery and other shortcomings when using the vehicle, he can not replace it. but it is necessary to take it out regularly, but if the spark plug does break down, it must be replaced in time. some of the broken spark plugs will fall into the engine cylinder, which will lead to greater shortcomings of forklift trucks.
three. forklift brake oil
under normal conditions, repairmen usually require replacement within one year or so, but there are not too many shortcomings in practice. if the brake system accessories of forklift truck do not show abnormalities, it is not necessary to replace them. however, it is often necessary to check whether there is any shortage or deterioration, or to be able to pass visual inspection. if the brake oil is below the minimum level, the real demand may increase directly. forklift brake oil, if severe, will affect the braking function of the brake. in order to replace the brake oil of the forklift, it is necessary to replace the genuine brake oil. if not the genuine brake oil is used for a long time, the whole brake system will fail. tino machinery shows that the detection method of whether the brake oil is genuine can use the following method: stretch one finger into the brake oil bottle, soak into the brake oil, and then stretch out in normal air for about a minute, the finger has a fever feeling, can basically distinguish the forklift brake oil as genuine.
four. forklift oil
some imported oil is normally replaced in 1500 hours, while domestic oil is usually replaced in 750 hours or so. but in fact, as long as the oil color is clear and the oil level is not lower than the lowest level indicated, the replacement of oil does not have t